LANGUAGE JapaneseJapanese EnglishEnglish ChineseChinese

WINPRO Co.,Ltd.
Wind power generators:WINPRO-Wind Power GENRTATOR ROOF

WP200-3B-ROOF , WP1000-3B-ROOF
Short pole models suitable for installation on rooftop


This rooftop generator is a hybrid power generation system composed of wind and solar power generation modules.

In the hybrid configuration, WP200-3B-ROOF is composed of a 200-W wind turbine and a 220-W WPSL220 solar power generation module and outputs 420 W in total while a WP1000-3B-ROOF is composed of a 1000-W wind turbine and four 220-W WPSL220 solar power generation module (total capacity is 880 W) and outputs 1880 W in total.

Standard model

The standard rooftop wind power generator is a simplified model without enclosure.
An optional enclosure can be mounted depending on the location of installation.

Wind power generators WINPRO Rooftop unredeemable type

▲ WP200-3B-ROOF              ▲ WP1000-3B-ROOF


Option model
(with enclosure and base)

Option model (with base)

Wind power generators WINPRO Rooftop unredeemable type Wind power generators WINPRO Rooftop unredeemable type
▲ WP200-3B-ROOF   ▲ WP1000-3B-ROOF ▲ WP200-3B-ROOF   ▲ WP1000-3B-ROOF


Rooftop wind power generator ROOF WP200-3B-ROOF WP1000-3B-ROOF

 

WP200-3B-ROOF

WP1000-3B-ROOF

Wind power generation

Wind velocity for start of rotation

1.0 m / sec

1.2 m / sec

Wind velocity for start of power generation

1.2 m / sec

1.6 m / sec

Wind velocity at rated output

10..0 m / sec

1.2.5 m / sec

Design withstands wind velocity

60 m / sec

60 m / sec

Control system

Control brake

Full automatic dual regenerative brake system
+ manual regenerative brake system

Blade

Length

2.0 m

2.8 m

Width

30c m

50c m

Diameter

1.35 m

1.80 m

Number of blades

3

3

Material

Corrosion resistant aluminum alloy

Generator

Type

Outer rotor coreless permanent magnet multipole generator

Drive system

Direct drive

Rated speed

200 min -1(r pm)

200 min -1(r pm)

Rated output

200 W

1000 W

Material of casing

Corrosion resistant aluminum alloy

Pole and profile

height

60cm

90c m

Diameter

165.2mm : t = 5.0mm

216.3mm : t = 6.0mm

Material

STK carbon steel pipe

Painting

Corrosion resistant paintin
Hot dip galvanizin+ powder coating

Hybrid
*Option

Solar power generation

Solar power generation input/output system

220 W

800 W

WPSL320 × 1unit

WPSL320 × 4unit

Controller

Battery system

Battery charge/discharge management system

Output voltage

DC 12V

DC 48V

(*Option AC100V DC/AC inverter)

Gross weight

Wind power generator+pole

Approx200kg

Approx350kg

(Battery control box is excluded.)

* Specifications and profiles of the systems may be subject to change without notice.



sp sp

WINPRO Co.,Ltd.