The WINPRO controller is a result of our sophisticated control technologies.

It’s controller that adopted hybrid power generating system by wind power generation and photovoltaic generation.
The WINPRO controller achieves stable power generation control in wider wind velocity range from gentle to strong wind.
The up to date technologies support safer operation of the WINPRO wind power generator. (When the winds of middle level velocities hits the blades, the control circuit that protects the blades from over-rotation works to automatically control the rotating speed of the generator. )
This control circuit allows the generator to continue the power generation without stopping the blades up to the maximum allowable wind velocity or within the specified maximum wind velocity range. The control circuit is controlled by the automatic operation for the overcharge prevention. The controller consumes less energy and, therefore, the WINPRO generator system can efficiently supply the maximum usable power possible.

The WINPRO generator has a fully automatic electric brake system as standard equipment.

Since the brake system is designed to work in automatic mode, troublesome operations are not required even when you encounter a typhoon or sudden gust. In the maintenance stage, it is possible to operate the manual brake to stop the generator.

The LED light is automatically turned on (* for product with LED light)

The solar panel detects the brightness of the surroundings to automatically turn on the LED light whenever necessary.